Calcium Chloride BP Calcium Chloride IP Dihydrate Manufacturers

Muby Chemicals and a few more manufacturing units are in Mubychem Group, the pioneer manufacturer of Zinc Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate, Sodium Thiosulphate, Ammonium Chloride, & Pharmaceutical Chemicals in India since 1976. Currently we have manufacturing facilities spread across Western India. No other vendor in the world knows Calcium Chloride any better than we do. We are exporters to all the countries across the globe.

(FDA) GMP Approved, ISO-9001:2008 Certificate, "REACH" Pre-registered, ISO-22000:2005, Kosher Certified, Halal Certified, HACCP

Calcium Chloride BP IP Manufacturers

Anhydrous Calcium Chloride CAS Number 10043-52-4,
Dihydrate Calcium Chloride CAS Number 10035-04-8,
Hexahydrate Calcium Chloride CAS Number 7774-34-7

Calcium Chloride BP Dihydrate Specifications

CHARACTERS
Appearance
White or almost white, crystalline powder, hygroscopic.
Solubility
Freely soluble in water, soluble in ethanol (96 per cent).

IDENTIFICATION
Solution S (see Tests) gives reaction of chlorides.
It gives the reactions of calcium.
It complies with the limits of the assay.

TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water prepared from distilled water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and not more intensely coloured than reference solution.
Acidity or alkalinity: To 10 ml of freshly prepared solution S add 0.1 ml of phenolphthalein solution. If the solution is red, not more than 0.2 ml of 0.01 M hydrochloric acid is required to discharge the colour and if the solution is colourless, not more than 0.2 ml of 0.01 M sodium hydroxide is required to turn it red.
Sulphates: Maximum 300 ppm.
Aluminium: To 10 ml of solution S add 2 ml of ammonium chloride solution R and 1 ml of dilute ammonia and boil the solution. No turbidity or precipitate is formed.
If intended for use in the manufacture of dialysis solutions, the above test is replaced by the test for aluminium maximum 1 ppm.
Barium: To 10 ml of solution S add 1 ml of calcium sulphate solution R . After at least 15 min, any opalescence in the solution is not more intense than that in a mixture of 1 ml of distilled water and 10 ml of solution S.
Iron: Maximum 10 ppm, determined on solution S.
Magnesium and alkali metals: Maximum 0.5 per cent.
Heavy metals: Maximum 20 ppm.

Calcium Chloride Hexahydrate BP Specifications

CHARACTERS
Appearance
White or almost white, crystalline mass or colourless crystals.
Solubility
Very soluble in water, freely soluble in ethanol (96 per cent).
It solidifies at about 29C.

IDENTIFICATION
Solution S (see Tests) gives reaction of chlorides.
It gives the reactions of calcium.
It complies with the limits of the assay.

TESTS
Solution S
Dissolve 15.0 g in carbon dioxide-free water prepared from distilled water R and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and not more intensely coloured than reference solution.
Acidity or alkalinity: To 10 ml of freshly prepared solution S add 0.1 ml of phenolphthalein solution. If the solution is red, not more than 0.2 ml of 0.01 M hydrochloric acid is required to discharge the colour and if the solution is colourless, not more than 0.2 ml of 0.01 M sodium hydroxide is required to turn it red.
Sulphates: Maximum 200 ppm.
Aluminium: To 10 ml of solution S add 2 ml of ammonium chloride solution R and 1 ml of dilute ammonia R1 . Heat to boiling. No turbidity or precipitate is formed. If intended for use in the manufacture of dialysis solutions, the above test is replaced by the test for aluminium : maximum 1 ppm.
Barium: To 10 ml of solution S add 1 ml of calcium sulphate solution. After at least 15 min, any opalescence in the solution is not more intense than that in a mixture of 1 ml of distilled water and 10 ml of solution S.
Iron: Maximum 7 ppm, determined on solution S.
Magnesium and alkali metals: Maximum 0.3 per cent.
Heavy metals Maximum 15 ppm.

CALCIUM CHLORIDE DIHYDRATE IP

DESCRIPTION	WHITE, CRYSTALLINE POWDER OR FRAGMENTS OR GRANULES; ODOURLESS; HYGROSCOPIC.

SOLUBILITY	FREELY SOLUBLE IN WATER AND IN ETHANOL (95%).

STANDARD	CONTENT NOT LESS THAN 97.0% AND NOT MORE THAN THE EQUIVALENT OF 103.0 OF CaCl2.2H2O.

IDENTIFICATION	A 10% W/W SOLUTION GIVES THE REACTIONS OF CALCIUM SALTS AND OF CHLORIDES.

CLARITY AND	A 10% w/w SOLUTION IS CLEAR & COLOURLESS.
COLOUR OF SOLN.

ACIDITY & ALKALINITY	TO 10 ML OF A FRESHLY PREPARED 10% w/w SOLUTION ADD 2 DROPS OF PHENOLPHTHALEIN SOLUTION. TITRATE IT WITH 0.01N HYDROCHLORIC ACID OR 0.01N SODIUM HYDROXIDE; NOT MORE THAN 0.2 ML IS REQUIRED.

ARSENIC	NOT MORE THAN 3 PARTS PER MILLION.

IRON	NOT MORE THAN 20 PARTS PER MILLION.

HEAVY METALS	NOT MORE THAN 10 PARTS PER MILLION.

MAGNESIUM &	NOT MORE THAN 1%.
ALKALI SALTS

ALUMINUM AND	TO PASS THE TEST.
PHOSPHATE

BARIUM	TO PASS THE TEST.

SULPHATE	NOT MORE THAN 300 PARTS PER MILLION.

Calcium Chloride BP IP Manufacturers:

MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

Calcium Chloride Anhydrous Granules Prills Pellets Fused Powder Crystals Dihydrate Hexahydrate Solution IP BP USP ACS AR Analytical Reagent FCC Food Grade Manufacturers

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Brazil Chile Argentina Dubai Cameroon Guatemala Mexico Peru ---