Calcium Chloride Anhydrous Fused Dihydrate BP USP Manufacturers

Muby Chemicals and a few more manufacturing units are in Mubychem Group, the pioneer manufacturer of Zinc Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate, Sodium Thiosulphate, Ammonium Chloride, & Pharmaceutical Chemicals in India since 1976. Currently we have manufacturing facilities spread across Western India. No other vendor in the world knows Calcium Chloride any better than we do. We are exporters to all the countries across the globe.

(FDA) GMP Approved, ISO-9001:2008 Certificate, "REACH" Pre-registered, ISO-22000:2005, Kosher Certified, Halal Certified, HACCP

Calcium Chloride Anhydrous Granules Prills Fused Powder Crystals Dihydrate Hexahydrate Solution IP BP USP ACS AR Analytical Reagent FCC Food Grade Manufacturers

Anhydrous Calcium Chloride CAS Number 10043-52-4,
Dihydrate Calcium Chloride CAS Number 10035-04-8,
Hexahydrate Calcium Chloride CAS Number 7774-34-7

CAS No.: 10043-52-4; Molecular Weight: 110.98; Chemical Formula: CaCl2 for Calcium Chloride Anhydrous

Specifications and Grades of Calcium Chloride

Calcium Chloride Solid Fused:
Calcium Chloride Assay: 72-75% as CaCl2
Dry Basis Assay: 98% min.
Appearance: White Lumps
Magnesium: 0.3% max.
Iron: 100 ppm max.
In 50 Kgs. HDPE bag with HMHDP liner or as required by the buyer.
Calcium Chloride Porous Double Fused:
Calcium Chloride Assay: 80% as CaCl2
Dry Basis Assay: 98% min.
Appearance: White Lumps or Powder
Magnesium: 0.3% max.
Iron: 100 ppm max.
In 50 Kgs. HDPE bag with HMHDP liner or as required by the buyer.
Calcium Chloride Anhydrous:
Calcium Chloride Assay: 94-98% as CaCl2
Dry Basis Assay: 98% min.
Appearance White Lumps or Powder
Magnesium: 0.3% max.
Iron: 100 ppm max.
In 50 Kgs. HDPE bag with HMHDP liner or as required by the buyer.

CaCl2- Calcium Chloride Food Grade & Pharma Grade

Calcium Chloride Anhydrous	Calcium Chloride Dihydrate
Assay: 93% min. CaCl2 Calcium Chloride Anhydrous	Assay: 97 to 103% as CaCl2.2H2O Di-hydrate
Arsenic: 0.0003% max. 3 ppm. max.	Arsenic: 0.0003% max. <3 ppm
Lead (Pb): 0.001% max. 10 ppm. max.	Lead (Pb): 0.001% max. <10 ppm.
Heavy Metal as (Pb): 0.0003% max. 3 ppm. max.	Heavy Metal as (Pb): 0.0003% max. <3 ppm.
Magnesium/Alkali: 1% max	Magnesium/Alkali: 1% max.
Clarity of 10% Soln.: Clear & Colourless	Clarity of 10% Soln.: Clear & Colourless
Free Acid or Alkali: 0.005%max. & pH 4.5-9 0.2ml of 0.01M HCl/NaOH to 10ml of 10%	Free Acid or Alkali: 0.005%max. & pH 4.5-9 0.2ml of 0.01M HCl/NaOH to 10ml of 10%

Calcium Chloride Dihydrate & AR Analytical Reagent Grade

CaCl2.2H2O EXTRA PURE; A. R. MERCK SPECIFICATIONS.
Assay Calcium Chloride Dihydrate CaCl2.2H2O	97%-103%. as CaCl2.2H2O Calcium Chloride Dihydrate
Free Acid or Alkali	0.005% Max. as HCl OR Ca(OH)2.
Sulphate (SO4)	0.01% Max.
Iron	0.001% Max.
Magnesium	0.05% Max.

Calcium Chloride Hexahydrate (EXTRA PURE)

CaCl2.6H2O EXTRA PURE; A. R. MERCK SPECIFICATIONS.
Assay as Calcium Chloride Hexahydrate	99%-101%. as CaCl2.6H2O Calcium Chloride Hexahydrate
Free Acid or Alkali	0.005% Max. as HCl OR Ca(OH)2.
Sulphate (SO4)	0.01% Max.
Iron	0.001% Max.
Magnesium	0.05% Max.

We also offer specific grades as required by a particular industry as under:

Calcium Chloride .... Gas Grade
Calcium Chloride .... Desiccation of Solvents & Gases
Calcium Chloride .... Heat-Treatment Salt Grade
Calcium Chloride .... Cement Paint Grade
Calcium Chloride ... Graphic Grade
Calcium Chloride ... Refrigeration or Calcium Chloride Brine Grade

A Brine may be defined as liquid of low freezing point used in transmission of refrigeration without change of state. The brines commonly employed in refrigeration are Calcium Chloride CaCl2 and Sodium Chloride. Sodium Chloride is cheaper but cannot be used below minus 15C. CaCl2 of commercial grade can operate satisfactorily upto minus 40C. Use of CaCl2 above 33% should be avoided as it results in crystallization resulting in reduced efficiency. The CaCl2 selected should be adjusted to pH of around 8 and it should be free from free-acid and dirt. Coloured material should not be used as it results in corrosion and scaling of the tubes. For the same reason by-product CaCl2 is not desirable as it contains Organic Chlorides which may break into Hydrogen Chloride.

We offer Calcium Chloride IP BP USP Ph. Eur. FCC or Food Grade from our world class FDA approved, ISO-9001-2008 Certified facility, Anmol Chemicals

CALCIUM CHLORIDE IP DIHYDRATE

DESCRIPTION	WHITE, CRYSTALLINE POWDER OR FRAGMENTS OR GRANULES; ODOURLESS; HYGROSCOPIC.

SOLUBILITY	FREELY SOLUBLE IN WATER AND IN ETHANOL (95%).

STANDARD	CONTENT NOT LESS THAN 97.0% AND NOT MORE THAN THE EQUIVALENT OF 103.0 OF CaCl2.2H2O.

IDENTIFICATION	A 10% W/W SOLUTION GIVES THE REACTIONS OF CALCIUM SALTS AND OF CHLORIDES.

CLARITY AND	A 10% w/w SOLUTION IS CLEAR & COLOURLESS.
COLOUR OF SOLN.

ACIDITY & ALKALINITY	TO 10 ML OF A FRESHLY PREPARED 10% w/w SOLUTION ADD 2 DROPS OF PHENOLPHTHALEIN SOLUTION. TITRATE IT WITH 0.01N HYDROCHLORIC ACID OR 0.01N SODIUM HYDROXIDE; NOT MORE THAN 0.2 ML IS REQUIRED.

ARSENIC	NOT MORE THAN 3 PARTS PER MILLION.

IRON	NOT MORE THAN 20 PARTS PER MILLION.

HEAVY METALS	NOT MORE THAN 10 PARTS PER MILLION.

MAGNESIUM &	NOT MORE THAN 1%.
ALKALI SALTS

ALUMINUM AND	TO PASS THE TEST.
PHOSPHATE

BARIUM	TO PASS THE TEST.

SULPHATE	NOT MORE THAN 300 PARTS PER MILLION.

Calcium Chloride FCC US Food Chemical Codex

CaCl2 Formula wt, anhydrous 110.98
CaCl2·2H2O Formula wt, dihydrate 147.01
Calcium Chloride

REQUIREMENTS
Labeling: Indicate whether it is anhydrous or the dihydrate.
Identification: A 1:10 aqueous solution gives positive tests for Calcium and for Chloride.
Assay: Anhydrous: Not less than 93.0% and not more than 100.5% of CaCl2; Dihydrate: Not less than 99.0% and not more than 107.0% of CaCl2·2H2O.
Acid-Insoluble Matter Anhydrous: Not more than 0.02%; no particles per kilogram of sample greater than 2 mm in any dimension.
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 0.004%.
Lead: Not more than 5 mg/kg.
Magnesium and Alkali Salts Anhydrous: Not more than 5.0%; Dihydrate: Not more than 4.0%.

Calcium Chloride Anhydrous Fused Dihydrate Solution Manufacturers:

MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

Calcium Chloride Anhydrous Granules Prills Pellets Fused Powder Crystals Dihydrate Hexahydrate Solution IP BP USP ACS AR Analytical Reagent FCC Food Grade Manufacturers

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Brazil Chile Argentina Dubai Cameroon Guatemala Mexico Peru ---